Objective:

In this module we will reconstruct block corners by proportioning based off distances from old plans.

NOTES:

• The functions utilized in this module will be found in the MsCOGO Ribbon
• Street and Lane Widths are fixed (not to be proportioned) in this exercise.
• When proportioning, enter fixed distances as negative
• When entering any distance you wish to scale ground to grid, enter "s" as a suffix.

Movie:

Proportioning by Distance

Assignment:

1. Continue working with your last saved version of Part1.dwg, or switch to Part2.dwg
2. Set next pt at 5000 series in hot toggles menu
3. Ensure Point Protection is turned on
4. Turn on output scale so any inquiries you make will be listed in ground
5. Turn off "draw bearings and distances" in hot toggles
6. Freeze layer PMBC_F_PARCEL_LINE
7. Create New layer named Boundary, assign a color, set it current
8. Open plan NEP 88651
9. Proportion a line between pts 39..38 to solve for the block corners following the process shown in the movie