Autoplay
Autocomplete
Previous Lesson
Complete and Continue
COGO 3: Compute a Subdivision while Applying Scale Factors
Introduction
Introduction
Helpdesk
Processing Field Data & Converting to Grid
Project Overview
Setting Input and Output Scale Factors
Importing Traverse Data
Scaling Conventional Traverse
Importing GPS from raw file
Transformations
RTS 1: Shift Conventional Traverse Points
RTS 2: Rotate Conventional Points for Bearing Orientation
RTS 3: Shift RTK GPS Points to Static Observed Point
Reconstructing Boundaries Using Proportioning
Proportioning by Distance
Proportioning by Equal Division
Using Scale when Drafting and Annotating
Draft Buildings using Ground Distances and Scale Factor
Annotating Plan using Output Scale Factor and MsAnnotate Tools
Conclusion
Conclusion
Setting Input and Output Scale Factors
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock